Driveability analysis of terrain data offers an important technique for decision support for all kinds of movements in the terrain. The work described in this report uses a high resolution Digital terrain model generated from the laser radar data and further processed by the Category Viewer program, and information from the Real Estate Map. Properties of features found in a filtering process are calculated and compared with a set of rules in a knowledge base to get a driveability cost. This cost is then visualized in a graphical user interface. An evaluation of what driveability is and what it is affected by is performed, and a general cost function is developed, which can be used even if not all relevant information is available.

In this paper I have sought a suitable level of abstraction in my models describing the landscape; the models are made to be viewed from eyelevel. Because of the spectator being ?in the model? the objects included need a certain degree of realism. I have sought what is needed in the model to be able to comprehend that the model is showing a landscape. Some details might be unnecessary.

The aim of this study was to map and date glacial flutings with ice flows deviating from the predominating northwesterly ice flow direction in the southern part of Norrbotten County in northern Sweden, and also to investigate if parts of the glacial landscape are older than previously thought. The traditional view is that most landforms in the area were formed during the late Weichselian (W3). Analysis of the new high resolution elevation model (2 m grid) derived from laser scanning was performed after treating the data with a hillshade tool in ArcMap to reveal terrain features such as flutings. The analysis resulted in a map showing four main groups of deviating ice flows (N-S, NO-SV, SO-NV and S-N) and several westerly ice flows. The majority of flutings with deviating ice flows were found in low terrain.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .

Today there are many applications of Digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

Flooding events are no longer rare, floods occur all over the world. Accordingly, it is vital for the society and different authorities to work with flood mapping. To meet the goal of Uppsala kommun to map the risks of floods in Uppsala län, a map of the different areas around Funboån which are inside the area of risk for flooding have been developed.In the work, cross sections and the water flow have been measured. Moreover, an echo-sounding have been carried out in Funboån to map the bottom topography. From the bottom map and laser scanned data covering the study area, a terrain model was created.

We are in an emerging digital society where we are increasingly dependent on the mastery of IT and digital technologies to better carry out our everyday tasks. They cover everything from keeping in touch with family and friends to pay bills and declare. At the same time there are those who have not learned how to use the new technology and live their lives outside of the digital society. What happens to these people, in a society that is becoming increasingly digitized? Do they take harm by being in digital exclusion? It looks like this are issues that will not become less important as digital technology constantly changes.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

Digital depth-to-water maps can be produced from a digital elevation model (DEM). Then GIS- based algorithms are used to calculate water flows and the depth-to-water index classes dry, fresh, moist and wet. The purpose of this study was to investigate the possibility to use depth- to-water maps for site adapted planting.The results showed that use of depth-to-water maps for site adapted planting, roughly halved the proportion of improperly planted surfaces from an average of 9 % to 4 %. The variation in the values of proper surface decreased and the result became more even.. In addition, more pine than spruce was incorrectly planted.

Due to the requirement for reduced use of insecticides and the lack of competitive mechanical plant protection, you need a scarification with good result. This is often no problem to perform in normal terrain without technical barriers. However, in difficult terrain with large number of rocks and steep slopes, the result would be worse. The purpose of the study is, that in these areas with difficult terrain, to find out the scarified areas quality, describe the non-scarified areas conditions and find out where the limit is for the use of a traditional disc trencher. Findings indicate that there are usually not the machine that is the limit, but the driver of this.

The aim of this thesis in Archival Science was to explore the concept of electronic archives and the challenges that might be encountered when attempting to move archives into a new digital age, as well as having a closer look at the term e-archive itself. Another aim was to explore how the OAIS reference model works in practice.To explore these questions I decided to do a case study on E-Arkiv Stockholm, a functioning e-archive. I decided to do a study on several documents that were created throughout the project, these included documents related to the planning of the archive, as well as the final report. My reason for this method was that these docu-ments came straight from reality and would give a clear and unbiased view of the project and it?s many aspects.Examination of the documents showed that the OAIS reference model and its concepts had been the foun-dation of much of the planning.

In 2005 Gunhild Eriksdotter published Behind The Facades in which she analyses the ways of approaching historical buildings in archaeology. Eriksdotter emphasizes that the archaeology of buildings is in dire need of renewal videlicet the traditional outlook on buildings as two-dimensional objects need to change. She develops a method of analysing the spatial dimensions in a three-dimensional world. By fusing theories and methods in excavating archaeology and architecture, she is able to give us a new way of approaching buildings. Her method includes the analysing of a buildings material, spatiality and use.

Digital preservation is a relatively new subject to Swedish archives. Alhough computers have been used for a long time, preservation has been made on paper and stored on shelves. These days a lot of cities in Sweden have investigated how to best secure the digital information for the future through electronic archiving, e-archives. One option is to hand in the information as soon as possible, but to let the producer keep the information ownership yet some time. The idea is to let the producers of the information answer questions and hand out material, since they are more competent on their field.

This thesis has been done in collaboration with Höganäs Digital Metal. Höganäs Digital Metalwork with 3D printing of metal and need giveaway components that they can give tocustomers to show their development process.By making a parametric CAD model can we generate about 200 different designs of a?Höganäs brännvinskrus? in miniature. You can choose between different items that shouldbe in it and a variety of perforations to look into it..